← Back to the journal

Living-room design ·

How to Place a Round Mirror on a Panelled Wall with NAVADO Queen

Place a round mirror inside one rectangular wall panel and let the moulding frame the glass. In a British sitting room with period panelling or a contemporary European apartment with applied mouldings, this gives the mirror its own space above a console. NAVADO’s Queen Round Mirror is a useful example because the small circles and ovals along its rim soften the strong lines of the wall.

Queen Round Mirror above a pale console within a rectangular wall panel
NAVADO styling illustration. The round outline sits within the rectangular moulding, with clear wall around the outer pieces.

Measure between the inner edges of the moulding

The NAVADO Queen Round Mirror measures 80 × 80 cm overall. Measure the clear width and height inside the moulding, then tape up an 80 cm paper circle to represent its outer extent. In a panel with 100 cm of clear width, a centred circle leaves 10 cm on either side. Treat that as a way to judge the spacing in your room. Check the proposed height against the console, including anything that will sit on it, and view the whole arrangement from the doorway.

Leave enough wall to see the work at the edge

Queen’s border is assembled from separately bevelled circles and ovals in silver mirror glass. On a curve, the angled edge turns gradually away from the light, so a bright line can fade partway around a piece and reappear on its neighbour. The handwork shows in the placement of those curves. A small circle closes a space between two larger ovals, and the orientation of an oval helps the pattern turn around the rim. The combination gives the mirror enough detail to hold a wall on its own. Leave a band of plain wall around it so the bevels and moulding can each be seen clearly.

Silver circles and ovals around the Queen Round Mirror against a plain stone wall
NAVADO styling illustration. The plain stone backdrop makes it easier to see the outline of the separate silver mirror pieces.

Choose the reflected view before fixing the height

Stand by the doorway, then sit in your usual chair. Ask someone to hold a small mirror against the wall at two or three points inside the paper outline at the proposed hanging height. A curtained window can give the centre a broad area of soft light. A bare pendant or a table lamp may appear as a bright spot from the same chair. If the brightest object keeps pulling the eye, try adjusting the lamp position or the proposed mirror height while keeping the space around the moulding in balance.

Queen Round Mirror above a walnut dressing table reflecting a curtained window
NAVADO styling illustration. The reflection of a curtained window shows how a broad, softly lit surface can hold the centre of the composition.

Check the details with the maker

For a fitted interior, send a straight-on photograph and the clear dimensions inside the moulding, along with the console width and height. Ask for the dimensions of the central viewing area and an edge detail before agreeing the position. The images here are styling studies drawn from NAVADO’s catalogue. A detail photograph of the glass and joins is a better way to judge how the bevels and individual pieces will look at close range.